Analysis Of The Design Requirements For 20 Watt Solar Panel And Led In The Design Of Public Street Lighting (Pju) Based On A Microcontroller Using Solar Cell
Keywords:
Solar Panels, Light Emitting Diodes, Solar Powered Public Street LightingAbstract
Indonesia, with its tropical climate and year-round sunshine, holds great potential for developing renewable energy sources. Renewable energy plays a positive role as an alternative that needs to be developed to meet electricity needs, one of which is for Public Street Lighting (PJU). The implementation of solar-powered PJU (PJUTS) is one such alternative that can be offered. PJUTS utilizes sunlight as its energy source and batteries for energy storage, while making use of LED lights known for their environmental friendliness.
This research aims to implement the design requirements of a solar panel and 20-watt LED lamp for a solar cell-based PJU design. Additionally, the study outlines the application and data collection methods of PJUTS using a watt meter. The main objective of this research is to determine the requirements for using a solar panel and a 20-watt LED lamp.
The results of the study show that the PJUTS design with a 20-watt LED lamp can operate automatically. The lamp will turn off automatically when the charging process begins from the solar panel and will turn on automatically when the solar panel stops absorbing sunlight. Thus, this system offers an efficient and environmentally friendly solution for public street lighting in Indonesia.
References
Agostinelli, G., Batzner, D. L., & Burgelman, M. (2002). An alternative model for V, G and T dependence of CdTe solar cells IV characteristics. Proceedings of the 29th IEEE Photovoltaic Specialists Conference, 6, 744–747.
Buchroithner, A., Gerl, B., Felsberger, R., & Wegleiter, H. (2021). Design and operation of a versatile, low-cost, high-flux solar simulator for automated CPV cell and module testing. Solar Energy, 228(August), 387–404. https://doi.org/10.1016/j.solener.2021.08.068
Deepak, Srivastava, S., & Malvi, C. S. (2020). Light sources selection for solar simulators: A review. WEENTECH Proceedings in Energy, July, 28–46. https://doi.org/10.32438/wpe.060257
Fauzi, F., Tajudin, M. F. N., Mohamed, M. F., Azmi, A., & Manaf, N. A. A. (2021). Assessment of in-house build low cost solar panel simulator. Journal of Physics: Conference Series, 1878(1). https://doi.org/10.1088/1742-6596/1878/1/012038
Frolova, T. I., Churyumov, G. I., Vlasyuk, V. M., & Kostylyov, V. P. (2019). Combined Solar Simulator for Testing Photovoltaic Devices. Proceedings - 2019 IEEE 1st Global Power, Energy and Communication Conference, GPECOM 2019, 276–280. https://doi.org/10.1109/GPECOM.2019.8778607
Li, Q., Wang, J., Qiu, Y., Xu, M., & Wei, X. (2021). A modified indirect flux mapping system for high-flux solar simulators. Energy, 235, 121311. https://doi.org/10.1016/j.energy.2021.121311
Liu, G., Ning, J., Gu, Z., & Wang, Z. (2021). Stability Test on Power Supply to the Xenon Lamp of Solar Simulator. Journal of Physics: Conference Series, 1820(1). https://doi.org/10.1088/1742-6596/1820/1/012142
López-Fraguas, E., Sánchez-Pena, J. M., & Vergaz, R. (2019). A Low-Cost LED-Based Solar Simulator. IEEE Transactions on Instrumentation and
Measurement, 68(12), 4913–4923. https://doi.org/10.1109/TIM.2019.2899513
Moria, H., Mohamad, T. I., & Aldawi, F. (2016). Available online www.jsaer.com Research Article Radiation distribution uniformization by optimized halogen lamps arrangement for a solar simulator. 3(6), 29–34.
Quandt, A., & Warmbier, R. (2019). Solar cell simulations made easy. International Conference on Transparent Optical Networks, 2019-July, 1–4. https://doi.org/10.1109/ICTON.2019.8840329
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Riski Mistal Kadapi Silalahi, Solly Aryza Lubis; Beni Satria

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.




